STONE FINISHING
A new finish.
A fresh possibility.
Leathering, Polishing, Honing, Brushing, and ready-to-cut countertop blanks. Give your stone its next chapter with Slab Shaper.
2 blank sizes | Up to 2 sinks | 3 sides of backsplash
WHAT WE DO
One stone. More possibilities.
Explore a different surface or start with a countertop blank sized for your space.
Leathering
A textured surface with depth and character. Contact us to discuss your slab and desired finish.
Polishing
A reflective finish that brings out the pattern and movement in the stone.
Honing
A smooth, matte appearance for a softer look. Finish suitability depends on your stone.
Brushing
Explore a brushed finish for your stone. Contact us to discuss your slab and the look you want to achieve.
Countertop blanks
Choose a blank, set your finished length, and position up to two sinks.
Simple sizes.
Made for your space.
Choose a 51-inch or 110-inch blank, both 25.5 inches deep. Kitchen tops stay at 25.5 inches. Vanity tops are cut down to 22.5 inches at no charge.
51 inches x 25.5 inches deep
110 inches x 25.5 inches deep
4-inch backsplash included on the back, left, and right.
FROM YOUR MEASUREMENTS TO OUR SHOP
Build it. Review it. Confirm it.
01 / Configure
Select a blank and choose LEFT or RIGHT as you face the front of the cabinet. Measure the finished length and all sink and faucet centerlines from that one side only.
02 / Send for review
ALL MEASUREMENTS ARE THE RESPONSIBILITY OF THE PURCHASER.
OPTIONAL: Have one of our professional template staff from Slab Shaper come to your location and template for $150, to professionally measure and guarantee our measurements. Service is available throughout all delivery areas.
03 / Talk with us
A salesperson calls to confirm every order, including fit, availability, delivery, and final pricing.
A LITTLE CLOSER TO YOUR PROJECT
Local delivery, included.
Free delivery within 50 miles, measured in a straight line, of either DFW Airport or ZIP 76048. Outside that area, we will call and email you with delivery pricing.
Our salesperson confirms address eligibility before your order is finalized.
Frequently asked questions
Helpful answers before you measure, choose a sink, or request a quote.
Which side should I measure from?
Face the front of the cabinet and choose either LEFT or RIGHT—usually the wall side. Measure the finished length and every sink and faucet centerline from that same finished edge. Do not mix sides. Include approximately 1.5 inches of overhang beyond the cabinet at a non-wall end; do not add it twice when measuring an existing top.
What sizes and depths can I choose?
Blanks are 51 or 110 inches long and 25.5 inches deep. Your finished length cannot exceed the blank you select. Kitchen and laundry tops stay 25.5 inches deep. We cut vanity tops down to 22.5 inches deep at no extra charge.
How many sinks can I have, and where does the faucet go?
You can choose up to two sinks. Kitchen sinks require a 25.5-inch-deep top; vanity sinks go in 22.5-inch-deep vanity tops. Place the faucet behind the center of its sink, using the same centerline measurement from your chosen edge. For a multi-hole faucet, measure to the faucet/spout center—not the first hole. Our team confirms sink fit and drilling details before production.
What size are the faucet holes? Can I choose no holes?
Standard faucet holes are 1⅜ inches in diameter. Choose 0, 1, 2, 3, or 4 holes for each sink. Choose 0 if you do not want faucet holes drilled. Include your faucet specifications and any accessory-hole requests for our team to review.
Is backsplash included?
Yes. Every blank includes 4-inch backsplash for the back, left, and right sides.
Can Slab Shaper measure for me?
ALL MEASUREMENTS ARE THE RESPONSIBILITY OF THE PURCHASER.
OPTIONAL: Have one of our professional template staff from Slab Shaper come to your location and template for $150, to professionally measure and guarantee our measurements. Service is available throughout all delivery areas.
If you choose professional templating, the measurements you enter are preliminary. Fabrication uses the measurements taken by our staff.
Where is delivery free?
Delivery is free within 50 miles, measured in a straight line, of either DFW Airport or ZIP 76048. Outside those areas, we calculate delivery and contact you by phone and email with the price. Your salesperson confirms address eligibility.
Is my order final when I submit the form?
No. A salesperson calls to confirm measurements, fit, availability, delivery, and final pricing before an order is finalized. Any salesperson discount is confirmed directly with you. The blank-pricing form is currently in preview mode while the catalog is being prepared.
Read the measuring instructions or call (469) 917-6700 for help.
2026 Slab Shaper. All orders subject to salesperson confirmation.